In the proposed study, an investigation has been carried out in order to find a material efficient structure, capable of harnessing maximum solar spectrum. A material efficient structure designed using a one dimensional photonic crystal for amorphous silicon. Silicon material is used as it leadsto environmental friendly design. The principal objective of this study is to maximize the photon absorption, keeping reflection to a minimum. The influence of geometric parameters on the absorption is studied by using the Finite element method. The results show that the absorption is affected by the geometry parameters. The optimum parameters of the proposed structure are period (a = 180 nm), a filling factor (ff = 50 %) and depth (d = 150 nm). The increase of absorption in the lower region where the wavelengths are around 180 nm, is explained by the reduction of the effective index resulting from the structure of the absorbent layer. For wavelengths between 180 nm and 600 nm, the absorption is directly related to existing Fabry - Perot modes within the absorbent layer. Creating additional absorption peaks at wavelengths above about 600 nm weakly absorbed normally comes from the coupling of the incident light with slow Bloch modes of PC located above the light line.

  Повний текст PDF - 1.178 Mb    Зміст випуску     Цитування публікації

  Якщо, ви не знайшли інформацію про автора(ів) публікації, маєте бажання виправити або відобразити більш докладну інформацію про науковців України запрошуємо заповнити "Анкету науковця"